Use more of your own solar power
Store solar power generated during the day and use it later, instead of exporting all of it.
Commercial energy storage
ATMOCE BattBank: scalable battery storage for your business
A modular battery system that grows with your business. FlexxWatt advises on the right set-up, selects the suitable system and guides delivery and the project — installation is carried out by suitable installation partners.
- 16.08 kWhcapacity per pack
- Up to 7 packsstackable per system
- IP66ingress rating
- < 60 Vextra-low voltage architecture
Applications01 02 03 04
What commercial storage can mean for your site
Which application makes sense depends on your consumption profile, connection and generation. We assess that first.
Limit peak demand
The battery can supply power when your site briefly needs a lot. The effect depends on your peaks and the chosen capacity.
Support charging infrastructure
When several vehicles charge at once, stored energy can help spread the load on the connection.
Energy control
Combined with energy management, the system decides when the battery charges and discharges, within limits you set.
The product
Modular design, expandable per pack
The BattBank is built from stacked packs. You scale per module rather than per cabinet, and the set-up can be matched to the space and needs of your site.
Safety according to the manufacturer
- Extra-low voltage architecture below 60 V
- Passive pressure relief valve in IP66 design
- Active multi-sensor monitoring
- Over- and undervoltage protection
- Overcurrent and short-circuit protection
- Thermal management and insulation fault detection
Technical data (manufacturer)
| Model | MS-16K-U |
|---|---|
| Cell chemistry | LFP (lithium iron phosphate) |
| Capacity per pack | 16.08 kWh |
| Nominal battery capacity | 314 Ah |
| Rated output apparent power | 8 kVA |
| Max. output apparent power | 10 kVA |
| Max. stackable | 7 packs |
| AC round-trip efficiency | > 90% |
| Number of cycles | 10,000 |
| Dimensions (W × H × D) | 880 × 300 × 483 mm |
| Ingress rating | IP66 |
Source: official ATMOCE product information. Subject to change by the manufacturer. Pricing and final configuration follow after analysis.
Monitoring and control
Insight per pack, control at system level
According to ATMOCE, the status of each pack can be followed in the app. FlexxWatt looks at how the battery works with your generation, charge points and any energy management software, so the system does what your site needs.
More about energy management →
FlexxWatt's role
One point of contact from analysis to handover
- 01Advice
We analyse consumption, connection, generation and goals.
- 02System selection
Capacity and power are determined and substantiated separately.
- 03Delivery
The selected system and required components through FlexxWatt.
- 04Project guidance
Coordination with a suitable installation partner up to commissioning.
Next step
Curious what BattBank can do for your site?
Start with a business energy scan. We review your situation and provide a substantiated direction, without obligation.
