ATMOCE BattBank C&I · 7 × MS-16K-U
- Calculated storage need
- 98.6 kWh
- Calculated power need
- 0 kW
- Storage capacity
- 112.56 kWh
- Charge/discharge power
- 56 kVA rated · 70 kVA max.
- Connection limit (indicative)
- 55.2 kW
- Charging hub peak (at simultaneity)
- 22 kW
- Weight per cluster
- 1,129.5 kg
- Height per cluster
- 2440 mm
- Components per datasheet
- 7× MS-16K-U · 1× MS-SCU-CNI · 1× MS-ACCB-CNI
- Expansion
- Per 16.08 kWh pack, max. 7 packs (112.56 kWh) per cluster.
- Indicative and not binding; rules of thumb without metering data. No promise of savings, yield or payback.
- A battery does not increase your contracted transport capacity and does not replace a grid upgrade; whether peak shaving is feasible follows from the analysis.
- Your peak load is unknown; peak-shaving power can only be determined after analysing metering data.
- Without quarter-hour data we cannot reliably determine peak and storage need. We will request your metering data for a technical analysis.
- The battery power exceeds your connection or contract limit; charging and discharging will then be capped. We align this with your connection and grid operator.
- The charging hub peak is an estimate based on your simultaneity; smart charging can lower it.
- Floor mounted, footprint 880 × 483 mm per cluster, at least 350 mm between clusters; we check floor and location during the site survey.